Easy to use, WD40 Chain Cleaner and quickly removes dirt, grime, dust and oil from chains. Compatible with O, X and Z ring chains the formula blasts off contaminants and dries in minutes. A water dispersible degreaser designed to solubilise newly deposited, oxidized or aged greases and oils. Suitable for subsequent removal by rinsing with cold water. Regular cleaning helps to reduce wear on the chain to maintain performance for longer. FEATURES AND BENEFITS • Softens and solubilises all greases and oils. • Fast and easy rinsing. TYPICAL APPLICATIONS On metallic surfaces and most rigid thermosetting plastics for all engineering applications. DIRECTIONS FOR USE Spray liberally onto the surface to be treated, and allow to remain in contact for up to five minutes. Collect contaminated or superfluous liquid in a tray, or similar confinement. Agitation with a brush will assist in the removal of heavy or stubborn contamination. Flush with water to remove contamination and dry with a cloth or towel. Always work under well ventilated conditions, taking care to avoid vapour inhalation. NOTE: All contaminated oils and other hydrocarbons must be disposed of responsibly, in accordance with local authority regulations. WHERE NOT TO USE • On decorative substrates, where coatings may be affected. • On soft plastics or rubbers, without first ascertaining suitability of use.
Easy to use, WD40 Chain Cleaner and quickly removes dirt, grime, dust and oil from chains. Compatible with O, X and Z ring chains the formula blasts off contaminants and dries in minutes. A water dispersible degreaser designed to solubilise newly deposited, oxidized or aged greases and oils. Suitable for subsequent removal by rinsing with cold water. Regular cleaning helps to reduce wear on the chain to maintain performance for longer. FEATURES AND BENEFITS • Softens and solubilises all greases and oils. • Fast and easy rinsing. TYPICAL APPLICATIONS On metallic surfaces and most rigid thermosetting plastics for all engineering applications. DIRECTIONS FOR USE Spray liberally onto the surface to be treated, and allow to remain in contact for up to five minutes. Collect contaminated or superfluous liquid in a tray, or similar confinement. Agitation with a brush will assist in the removal of heavy or stubborn contamination. Flush with water to remove contamination and dry with a cloth or towel. Always work under well ventilated conditions, taking care to avoid vapour inhalation. NOTE: All contaminated oils and other hydrocarbons must be disposed of responsibly, in accordance with local authority regulations. WHERE NOT TO USE • On decorative substrates, where coatings may be affected. • On soft plastics or rubbers, without first ascertaining suitability of use.
